GLOBAL NEWS

AM 4 Industry Publishes its Project Report on Laser Beam Melting Processes

Report

 

laser beam melting
Above: AM 4 Industry publishes its project report on laser beam melting processes/Image Credit: AM 4 Industry

Through a COllective Research NETwork (CORNET) project led by Ecoplus Plastics and Mechatronics Cluster in Lower Austria, an Austrian-German research team investigated frequent errors, possible process deviations and resulting component defects during the LBM process.

Laser Beam Melting (LBM) is an additive manufacturing technology in which a laser fuses powdered materials layer by layer to a specific geometry. The process is also referred to as Electron Beam Melting (EBM). The final quality of this process depends on many complex parameters, which can lead to critical component defects in the event of process deviations.

To create an LBM Additive Manufacturing Error Catalogue, Thomas Schlauf (FOTEC), Max Lutter-Günther (IGCV) and Claudia Rosenkranz (IGCV) systematically analysed the effects of the most varied process deviations on component quality on an EOS M280 laser melting system. The team distinguished between component, material and construction errors that were caused by the primary sources of error—machine, material, process or human. They identified geometric deviations, inadequate surface quality, adhesion defects and porosity as the most common component and material defects. Frequent construction errors were distinguished between automatic construction stops with waste or intact parts and manual construction stops aimed at preventing welding spatter in the event of faults in the shielding gas flow. The experts printed tensile specimens while carefully monitoring the process. The results were then tested according to ASTM E-8 and logged in an LBM Additive Manufacturing error catalogue. This publicly available catalogue aims to support industrial users’ integration of 3D printing technologies.

AM 4 Industryis a cross-border research project. Eight research partners and 51 companies from Austria, Germany and Belgium studied for two years successful application of additive manufacturing in the industry. 

The project was financially supported by the Austrian Research Promotion Agency FFG in the course of a CORNET (COllective Research NETworking).

The research also had other partners like Research Subsidiary of FH Wiener Neustadt – FOTEC & Fraunhofer Institute for Casting, Composite and Processing Technology – IGCV.

About ecoplus: As a privately managed agency with decades of experience, a highly specialised team and a comprehensive network, ecoplus offers tailor-made services for the Lower Austrian economy. First-class company locations are available in 18 business parks.


About Manufactur3D Magazine: Manufactur3D is an online magazine on 3D Printing. Visit our Global News page for more updates on Global 3D Printing News. To stay up-to-date about the latest happenings in the 3D printing world, like us on Facebook or follow us on LinkedIn.

Related posts

Prodways Materials Unveils New E-Commerce Site for Resins and 3D Printing Powder Materials

MANUFACTUR3D

3D Printing Facilitates First-of-its-Kind Kidney Transplant in Belfast, UK

MANUFACTUR3D

SLM Solutions to provide Technical Expertise to Support Standardization Project in the Oil, Gas and Maritime Industry

MANUFACTUR3D