INDIAN SCENARIO

Wipro 3D, in collaboration with Sree Chitra Tirunal Institute for Medical Sciences and Technology launched AirBridge, an Emergency Breathing Assist System

Emergency Breathing Assist System
Metal AM Solutions Centre
Above: Wipro 3D Metal AM Solutions Centre in Bengaluru/Image Credit: Wipro 3D

Earlier this month, Wipro 3D, a business of Wipro Infrastructure Engineering, in technical collaboration with Sree Chitra Tirunal Institute for Medical Sciences and Technology (SCTIMST, Trivandrum, an Institute of National Importance under the Department of Science and Technology, GoI), launched AirBridge, the Wipro Chitra Emergency Breathing Assist System (EBAS).

AIRBRIDGE – THE WIPRO CHITRA EMERGENCY BREATHING ASSIST SYSTEM (EBAS)

Emergency Breathing Assist System
Above: AirBridge, the Wipro Chitra Emergency Breathing Assist System (EBAS)/Image Credit: Wipro3D

Millions of people worldwide are affected by COVID-19 pandemic. In India, the devastating nature of the illness called for the immediate indigenous development of ventilators.

In the scenario of non-availability of adequate numbers of mechanical ventilators, an emergency breathing assist device like the Air Bridge can be used in the short term (hours to a few days) till mechanical ventilation can be provided in an ICU. The battery backed device is operator-friendly and it is also easy to train the operators. It is portable and has low running cost. This automatic device will minimize the need of nursing staff to continuously monitor the device and enables a safe, and effective temporary respiratory support to COVID patients for whom access to mechanical ventilator is not immediately available. It works as a bridge device before mechanical ventilation.

The device has all the essential features to perform this function and is compliant with national/international standards and guidelines. It is manufactured with components sourced from established supply chains within the country

For clinical application, the device needs to be used along with standard consumables like breathing tubes, PEEP valve and bacterial- viral filters before connecting to the patient.

The initial knowhow and design of the Emergency Breathing Assist System (EBAS) developed by SCTIMST was transferred to Wipro 3D in April 2020 for further joint development. The device is now ready for commercial production after completing a thorough quality testing.

Commenting on the launch of the device, Dr V K Saraswat, Hon. President, SCTIMST & Member NITI Aayog, said, “The problem of sudden reduction in oxygen in relatively mild disease and occurrence of deaths during transportation of such patients demanded the development of an emergency breathing assist system. I foresee wide application for this device in the Covid scenario. The ease of operation by trained paramedical staff or health care workers could be a big boon for smaller hospitals for managing patients till they can be shifted to ICU care “

Mr Pratik Kumar, CEO, Wipro Infrastructure Engineering, said, “Our Product launches and innovations in Wipro in the last couple of months are focused on fighting the pandemic. Our collaboration with SCTIMST has helped Wipro 3D to fast track the Design & Development. We believe the AirBridge will significantly contribute to the efforts of bringing emergency medical care to the patients.”

Mr. Ajay Parikh, Vice President & Business Head, WIPRO 3D, said, “AirBridge can provide ventilator support to both COVID-19 and non-COVID-19 related emergencies in hospital wards and during transportation of patients in ambulances till conventional mechanical ventilation support is provided in an ICU.”

Prof. Asha Kishore, Director, SCTIMST said, “We took into consideration the potentially fatal respiratory complications of COVID -19 and the shortage of ventilators to meet the unprecedented requirement of ventilators to treat such patients in many cities. A team of engineers from the Department of Medical Devices Engineering and the Department of Anaesthesia of the Institute developed the design and knowhow of the technology. It is not a replacement for a mechanical ventilator, but it does not require an intensive care specialist to operate it and can be a life saving device in both Covid and non-Covid emergencies for providing short term respiratory support “.

About Wipro 3D: Wipro 3D is a leading provider of Additive Manufacturing Solutions to customers including Additive Consulting, Additive and Product Engineering, Additive Manufacturing, R&D services Special purpose machines as well as set up and operations of captive AM centres.

About SCTIMST: Sree Chitra Tirunal Institute for Medical Sciences and Technology (SCTIMST) is one of the premier R and D Institutes for medical devices and biomaterials and has an advanced super specialty hospital for cardiac and neurological disorders. It has also a wing for health science studies. It is under the administrative control of the Dept of Science and Technology, GOI.


About Manufactur3D: Manufactur3D is an online magazine on 3D Printing. Visit our Indian Scenario page for more updates on 3D Printing News from India. To stay up-to-date about the latest happenings in the 3D printing world, like us on Facebook or follow us on LinkedIn.

Related posts

Rising from Humble Beginnings, A3DXYZ, an Upcoming 3D Printing Service Bureau from Satara, Maharashtra

MANUFACTUR3D

Doctors at Jaipur’s SMS Hospital to Soon Use 3D Printing to Restore Faces of Patients with Oral Cancer

MANUFACTUR3D

Vellore Institute of Technology (VIT) to Organise BioMet 2018: An International Conference on Biomaterials, Bioengineering, and Biotheranostics

MANUFACTUR3D